HARDWARE DESCRIPTION

Features

  • Resolution: 1280x800

  • Plug & Play

  • 10-point Touch Capacitive Screen

  • Power Input: DC 12V/1.5A

  • Power Output: USB Type A 5V/3A

  • Aspect Ratio:8:05

  • Consumption: 7W

  • LCD Type: IPS

  • Speaker: 8Ω/2W

Back

_images/ts10_back.jpg

This is the back of it, with the main board, speakers and touch module pre-installed. To use it, just attach your control board to it and connect all the wires.

Touch Module

_images/touch_module.jpg

There are two types of 4pin connector on the touch module, with the pin serial number shown on the figure.

Here are the definitions of the pins:

  • Pin 1: VDD(5V)

  • Pin 2: D-

  • Pin 3: D+

  • Pin 4:GND

LED Indicators

_images/led_2.jpg
  • Power on the screen, after the Signal LED flashes one time, it lights on continuously; and the Power LED lights on immediately.

  • If there’s no HDMI signal, only the Power LED will turn on.

  • If there’s an HDMI signal, these two LEDs will turn on.

  • If you press the power button, the Signal LED will turn off and the Power LED will keep turning on.

  • If you remove the power adapter, both of the two LEDs will turn off.

Buttons

_images/buttons.jpg

Buttons on the main board and their functions:

Working

Sleep

Menu

Volume Adjust

Brightness Adjust

Power

Enter Sleep state

Enter Working state

Enter Sleep state

Enter Sleep state

Enter Sleep state

Menu

Open the Menu

Confirm

“+”

Increase Volume

“+”

Increase Volume

Increase Brightness

“-”

Decrease Volume

“-”

Decrease Volume

Decrease Brightness

Back

Open the Brightness adjust

back

back

back

Ports

_images/port2.jpg

On one side of the main board there are ports of HDMI input, 12V power input, and 5V/3A USB power output and Speaker Port.